post tension shop drawings

hielscher April 22, 2022 drawings , post , shop , tension Comment

A boot is attached to the timber tie with bolts and shear plates transferring the load. When done on the face gua sha can reduce fine lines and wrinkles restore firmness and elasticity promote a brighter complexion relieve jaw tension promote lymphatic drainage and decrease puffiness.

Mechanical Components Design Drawings Mechanical Engineering Architecture Drawing Mechanical Engineering Design Designs To Draw

The detail on the left shows ones solution.

. Relevant shop drawing showing tendon numberlocation etc in line with approved consultantdesign drawing shall be submitted to the consultant for information. The tension discs squeeze the thread as it passes between them while the tension regulator controls the amount of pressure on the discs. Approved design and shop drawings shall be followed for all works.

The best way to learn how to do gua sha on the face is by watching so Ive included an in-depth video tutorial at the end of this post. On newer models there are three discs controlled by a dial. Steel tension rods can carry in excess of 35000 pounds of tension in large timber trusses.

On older machines there are only two tension discs controlled by a screw or knob. That load needs to be transferred from the rod to the timber truss. Ducting shall be laid in the correct positions according to the approved shop drawings.

The tension discs and tension regulator together are called the tension assembly. Joints in the duct shall be staggered with a low. To keep the end of the boot from bending a short 3x3 HSS hollow steel section is welded on for.

A3 Advanced Architecture Apartments Residental Apartment Building Bulgaria Sofia Shop Drawings Apartment Architecture Concrete Structure Post Tension